Saturday, May 19, 2012

Class XI, INFORMATION TECHNOLOGY, "History of Computers"

History of Computers
At the early age people used pebbles, stones, sticks, scratches, symbols and finger tips to count, which were later replaced by numbers.
The history of computing is divided into three ages during which man invented and improved different types of calculating machines. These ages are,
  • Dark age – 300 BC to 1890
  • Middle age – 1890 AD to 1944
  • Modern age – since 1944 AD
Dark Age (3000 BC to 1890 AD
ABACUS
About 3000 years BC, Chinese developed the first calculating machine named Abacus or Soroban.
Abacus consists of a rectangular wooden frame having rods which carry round beads. Counting is done by shifting the beads from one side to another.
OUGHTRED’S SLIDE RULES
In 1632 AD William Oughtred, an English mathematician developed a slide rule. This device consists of two movable rules placed side by side on which number were marked.
PASCAL’S CALCULATOR
Blasé Pascal (1623-1662), a French developed the first mechanical calculating machine in 1642. This machine consists of gears, wheels and dials. It was capable of adding and subtracting operations.
GOTTEFRIED WILHOLM LEIBNITZ
In 1671, a German, Gottfried Von Leibnitz (1646-1716) improved Pascal’s calculator to make it capable of performing all maths operations.
JACQUARD’S LOOM
In 1801, a French, Joseph Marie Jacquard developed the first punch card machine.
BABBAGE DIFFERENCE ENGINE
Charles Babbage (1792-1871) an English mathematician also called Father of modern computer. As he gave the true concept of computer at Cambridge University, he developed Babbage Difference Engine in 1823 and Babbage Analytical Engine in 1833.
Lady Ada Augusta an assistant of Babbage is called the first programmer.
Middle Age (1890 AD TO 1944 AD)
DOCTOR HERMAN HOLLERITH
In 1880s Herman Hollerith an American developed a machine which used punch card system. The machine could sense and punch holes, recognize the number and make required calculations. This machine was first used in 1890s by American Census Bureau.
HOWARD AIKEN- MARK-1 COMPUTER
In 1937, Professor Howard Aiken build the first electro-mechanical computer Mark-1, by trying to combine Babbage’s theory and Hollerith’s punching technologies. He completed his project in 1944 with the help of IBM Engineers.
Mark 1 could multiply two, twenty digit numbers in 5 seconds and made a lot of noise. It had a shape like a monster about 50 feet long, 8 feet high, having wiring of length equal to distance from Lahore to Gilgit or Karachi to Bahawalpur (800km) and had thousand ends of electro-magnetic relays.
ABC (ATANASOFF BERRY COMPUTER)
ABC a special purpose computer was developed in 1938 by Dr. John Vincent Atanasoff and Clifford Berry at Iowa State College, USA.
Modern Ages (Since 1944 AD)
JOHN VON NEUMAN
In 1945, Dr. John Von Neuman suggested the concept of Automatic Data Processing (ADP) according to the stored program and data. ENIAC
(FIRST ELECTRONIC COMPUTER)
Electronic Numerical Integrator And Calculator (ENIAC) was the first electronic computer made in 1946 by John Presper Eckert and John Williams Mauchly, at the University of Pennsylvania, USA. This was based on decimal number system and it has no memory.
It could perform 5000 additions or 350 multiplications in one second. It contained 18000 vacuum tubes, 70,000 resistors, 10,000 capacitors and 60,000 switches and occupied a two room car garage. It consumed 150 kW of power. It weighed 27 tons.
EDSAC (FIRST STORED PROGRAM COMPUTER)
Electronic Delay Storage Automatic Computer (EDSAC) was first computer based on stored program concept. It was completed by Mourice Wilkes at Cambridge University in 1949.
EDVAC
Electronic Discrete Variable Automatic Computer (EDVAC) was built by John Williams Mauchly, John Presper Eckert at Moore School, Pennsylvania in 1951.
UNIVAC (FIRST COMMERCIAL COMPUTER)
UNIVersal Automatic Computer (UNIVAC) was the first commercially used computer made by John Presper Eckert and John Williams Mauchly in June 14, 1951.
Generations of Computer
First Generation of Computer (1946-1959)
Main Features
  • Major Innovation – Vacuum Tubes
  • Main Memory – Punched Cards
  • Input Output Devices – Punched cards and papers
  • Languages – Low level machine language
  • Operating System – No operating system, human operators to set
  • switches
  • Size – Main frame for example ENIAC, EDVAC, UNIVAC
The duration lasted from 1946-1959 was based on vacuum tubes. These vacuum tubes were about the size of 100 watt light bulb and used as the internal computer component. However because thousands of such bulbs were used, the computers were very large and generate a large amount of heat, causing many problems in temperature regulation and climate control.
In this generation input and out put device (punched card) that was used fro data storing purpose were very slow. The computers were operating manually and the language used was a low level machine language (symbolic language) with binary code that required a high programming skill. ENIAC, EDVAC, UNIVAC and Mark-1 were some of the major inventions of this generation.
Advantages of First Generation
1. Vacuum tubes were used as electronic component.
2. Electronic digital computers were developed for the first time.
3. These computers were the fastest calculating devices of their time.
4. Computations were performed in millisecond.
Disadvantages of First Generation
1. Too large in size.
2. They were unreliable.
3. Induce a large amount of heat due to the vacuum tubes.
5. Not portable.
6. Limited commercial use.
Second Generation of Computers (1959-1964)
Main Features
  • Major Innovation – Transistors as main component.
  • Main Memory – RAM and ROM.
  • External Storage – Magnetic tapes and Magnetic Disk.
  • Input Output Devices – Magnetic tapes and Magnetic Disk.
  • Languages – Assembly language, some high level languages for Example BASIC, COBOL, FORTRAN.
  • Operating System – Human handles punched card.
  • Size – Main frame for example IBM-1401, NCR-300, IBM-600 etc.
The period of this generation is from 1959 to 1964. During this period transistor were used for internal logic circuits of computers. These computers could execute 200000 instructions per second. The input/output devices became much faster by the use of magnetic table. During this period the low level programing language were used however the high level programming languages such as FORTRAN and COBOL were also used. The problem of heat maintenance was solved and size of computer reduced, while speed and reliability were increased. Many companies manufactured second generation computers and many of those for business applications. The most popular second generation computer was IBM-1401, introduced in 1960, while the following computers were used by many business organizations. IBM-1400 series, IBM-1600 series, UNIVAC-III, NCR-300 etc.
Advantages of Second Generation
1. Smaller in size as compares to 1st generation.
2. Much more reliable.
3. Less heat generated.
4. Computation was performing in micro second.
5. Less hardware and maintenance problem.
6. Could be used for commercial use.
Disadvantages of Second Generation
1. Very costly for commercial use.
2. It still required frequent maintenance.
3. Frequent cooling also required.
Third Generation of Computers (1965-1970)
Main Features
  • Major Innovation – Integrated circuit (ICs) as basic electronic component.
  • Main Memory – PROM and DRAM.
  • External Storage – Improve disk (Floppy Disk)
  • Input and Output Devices – Keyboard for input, monitor for output.
  • Languages – More high level languages.
  • Operating System – Complete operating systems were introduced.
  • Size – Mini, for example: IBM SYSTEM / 360, ICH-360, HONEY WELL-316 etc.
In this generation the integrated circuits (IC) were used. Integrated circuits contain many electronic components on a single chip. The disk oriented systems wee made at the end of this generation. The size of computer became very small with better performance and reliability. High level programming languages were extensively used. In 1969 the first microprocessor chip INTEL 4004 was developed but it was used only in calculators. The faster input/output devices made possible multi-processing and multi programming. Where by a number of input terminals could be run virtually at the same time on a single centrally located computer. The famous computer were IBM-360, IBM-370, UNIVAC 9000 series etc.
Advantages of Third Generation
1. Smaller in size as compared to second generation.
2. More reliable.
3. Portable
4. Less electricity consumption.
5. Heat generation was rare.
6. General purpose computer.
Disadvantages of Third Generation
1. Air conditioning was required in many cases due to ICs.
2. Very advance technology was required to make the ICs.
Fourth Generation of Computers (1971-1981)
Main Features
  • Major Innovation – LSIC and VLSIC (Micro Processor)
  • Main Memory – EPROM and SRAM.
  • External Storage – Floppy Disk and Hard Disk.
  • Input and Output Devices – Monitor for output.
  • Languages – Languages and application softwares.
  • Operating System – MS-DOS and PC-DOS
  • Size – Micro computer e.g. IBM-PC, Apple Macintosh etc.
The Integrated circuits were more developed and called Small scale integration (SSI), after some time the SSI were more developed and termed as Large scale integration (LSI). There was a great versatility of input/output devices. In 1971, a powerful microprocessor chip INTEL 8008 was introduced. The first microprocessor which is used in personal computers (PC) was INTEL 8080. The 8 inch floppy disk was also introduced in 1971, while hard disk was introduced in 1973. The 5.25 floppy disk was first time used in 1978. The optical disk was developed in 1980. First portable computer “Osborne I” was marketed in 1981. IBM-3033, IBM-370, IBM system 34, IBM system 36, Cray-I, CP/M etc were introduced in this generation.
Advantages of Fourth Generation
1. Smaller in size and much reliable.
2. No cooling system required in many cases.
3. Much faster computation.
4. Portable and cheap.
5. The heat generated was negligible.
6. Totally general purpose computer.
Disadvantages of Fourth Generation
1. Very advanced technology was required to fabricate to the ICs.
Fifth Generation (1981-Onward)
Main Features
  • Major Innovations – ULSIC (Ultra large scale integrated circuit)
  • Main Memory – EEPROM, SIMM and DIMM.
  • External Storage – Modified magnetic and Optical disks.
  • Input/output Devices – Keyboard, Pointing Device, Scanner as input and Monitor as main output.
  • Languages – AI (Artificial Intelligence) Expert systems.
  • Operating System – GUI based e.g. Windows 95, Windows NT.
  • Size – Very small in size example: Laptop, Note book, Digital Diary, Palm top and Pocket PC.
This generation is started from 1981 and still continued, new technologies are adopted to fabricate IC chips, such as electron beam, X-rays or laser rays. The Very Large Scale Integration
(VLSI) was developed, so the computer became much smaller than ever before. New memory storage device like bubble memory, optical or memory are being designed. the new computer will be controlled by using human voice and will work by giving command in our own language. Future computer will in some way to be intelligent and capable of making decision.
Advantages of Fifth Generation
1. Very large storage capacity.
2. Long bit processor builds.
3. Artificial Intelligence Language developed

11 comments:

  1. My spouse and I stumbled over here by a different website and thought I may as well check things out.
    I like what I see so now i'm following you. Look forward to going over your web page for a second time.

    Check out my blog post netent software casinos

    ReplyDelete
  2. This piece of writing is really a good one it helps new net visitors,
    who are wishing for blogging.

    Also visit my site - http://heronexpert83.livejournal.com/813.html

    ReplyDelete
  3. Thanks in support of sharing such a pleasant idea, piece of writing is good, thats why i have
    read it fully

    My homepage ... http://dirtyoilsands.org/

    ReplyDelete
  4. I loved as much as you will receive carried out right here.
    The sketch is tasteful, your authored material
    stylish. nonetheless, you command get got an edginess over that you wish be delivering the
    following. unwell unquestionably come further formerly again since exactly the
    same nearly a lot often inside case you shield this increase.



    Look at my web-site ... best net entertainment casinos

    ReplyDelete
  5. At this time I am ready to do my breakfast, afterward having my breakfast coming over again to read further news.


    Also visit my weblog - all netent casinos

    ReplyDelete
  6. Your style is really unique compared to other folks I have read stuff from.
    Thank you for posting when you have the opportunity,
    Guess I'll just bookmark this site.

    Feel free to surf to my homepage - netent casino list

    ReplyDelete
  7. This website was... how do I say it? Relevant!
    ! Finally I've found something that helped me. Appreciate it!

    Feel free to visit my web page: new netent casinos

    ReplyDelete
  8. Wonderful work! This is the kind of information that are meant to be shared around the net.
    Disgrace on Google for no longer positioning this publish higher!
    Come on over and visit my website . Thank you =)

    Feel free to visit my webpage ... netent casino

    ReplyDelete
  9. Hi there to all, the contents present at this site are truly remarkable for people
    knowledge, well, keep up the nice work fellows.

    Feel free to visit my weblog: Netent Casino Games Free

    ReplyDelete
  10. I think everything posted was actually very logical. However,
    what about this? suppose you were to write a awesome headline?
    I ain't suggesting your content isn't solid, however what if you added a title to
    possibly grab people's attention? I mean "Class XI, INFORMATION TECHNOLOGY, "History of Computers"" is a little vanilla. You ought to look at Yahoo's front page and
    note how they write news headlines to get viewers
    to click. You might try adding a video or a picture or two to grab readers interested
    about everything've written. Just my opinion, it would make your posts a little bit more interesting.

    Here is my blog :: new netent casinos

    ReplyDelete
  11. If you want to increase your familiarity only keep visiting this web site and be updated with the latest gossip posted here.


    Feel free to visit my page :: www.bookcrossing.com

    ReplyDelete